HSF-Series

Neji Taro aligns screws! The work efficiency of a production line will be dramatically improved. ● A single unit can handle different screw diameters by changing rails. ・ HSF-01 handles 4 screw diameters, and HSF-02 handles 3 screw diameters. ● Low-profile design most suitable for cell production with the width of 55mm ● It can handle screws with thin heads by adjusting the sensor.

		HSF-12 (M1.2)
Power Supply	Input	AC100-240V (50/60Hz)
Power Supply	Output	DC15V 1A
Weight(g)		About 2.4kg (including the rail)
Screw capacity		40cc
Over load protection circuit		Reverse rotation when overloaded, Forward rotation when restored
Model Number		HSF-10 (M1.0)
		HSF-14 (M1.4)
		HSF-17 (M1.7)
		HSF-20 (M2.0)
		HSF-26 (M2.6)
		HSF-30 (M3.0)
External Dimensions(mm)		55(W)×205(D)×14.25(H)
Driver type		For manual operation
Accessories		1 installed standard rail, 1 hexagonal wrench (width across flats 2mm)

Model			Nominal screw diameter	(D)Head diameter(∅)	(H) Head thickness(mm)	(L)Shaft length(mm)
Feeder Unit only	Feeder Unit (with rail unit)	Rail unit only	Nominal screw diameter	(D)Head diameter(∅)	(H) Head thickness(mm)	(L)Shaft length(mm)
HSF-01	HSF-10 (with WR-10)	WR-10	M1.0	1.2-2.2	0.35 or more	1.6-16
	HSF-12 (with WR-12)	WR-12	M1.2	1.4-2.5	0.35 or more	1.8-16
	HSF-14 (with WR-14)	WR-14	M1.4	1.6-2.8	0.35 or more	2.0-16
	HSF-17 (with WR-17)	WR-17	M1.7	1.9-3.4	0.35 or more	2.3-16
	HSF-20 (with WR-20)	WR-20	M2.0	2.2-4.2	0.35 or more	2.6-16
HSF-02	HSF-26 (with WR-26)	WR-26	M2.6	2.8-5.0	0.35 or more	3.2-16
HSF-02	HSF-30 (with WR-30)	WR-30	M3.0	3.2-5.8	0.35 or more	3.6-16